Bar's

We are one of the leading Suppliers & Exporters of Bar's in different shapes and sizes and with different specifications as per the customers’ requirement. These Bar's are characterized by high durability, resistance to corrosion, flawless finish and complete reliability in service. Our complete range is stringently tested by our well equipped testing unit, to ensure their compliance with international quality norms. These are used in various industries like Oil & gas, Petrochemical, Pharmaceutical, Fertilizers, Construction, Food, Power and Instrumentation


Stainless Steel Bar's Specification

SIZE RANGE : 20mm x 160mm Rounds, 75mm x 160mm round corner squares

LENGTH : 3 – 6.5 metres

SUPPLY CONDITION : Hot rolled, Hot rolled + annealed, Hot rolled + hardened + tempered, Higher sizes upto 34mm on request


Round Bar's Specification

Specifications : EN, DIN, JIS, ASTM, BS, ASME, AISI

Length : 1 to 6 Meters, Custom Cut Lengths

Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Condition : 25.4 mm and less generally drawn, above 25.4mm and less than 101.6mm is generally annealed, turned and polished. Sizes above 101.6mm are generally rough turned to k12 tolerance.

Grades : ASTM A276 / ASME SA276 202, 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 904L


Bright Bar's Specification

Size Range : 5mm - 120mm (3/16" - 4-3/4")

Length - 3 to 6.5 Meters
Cold Drawn, Centreless Ground, Peeled & Polished, Rough Peeled or Smooth Turned bars
Tolerances - h7, h8, h9, h10, h11, k12, k13
Surface finish RA upto 0.2 mm (12 RMS)
Straightness upto 0.5 mm per meter TIR
Grit Polish as per Customer´s Request
Heat Treatment - Soft Annealing, Solution Annealing, Oil & Water Quenching, Tempering & Normalizing
Bars End Finish - Chamfered ends - 300, 450 & 600, Plain ends without Burrs or Sharp Edges
Specifications - As per EN, DIN, JIS, ASTM, BS, ASME, AISI, GHOST, AISI/NACEMR 0175
100% identified by Handheld Spectrometer
Free from radioactive elements & mercury, lead contamination


Precision Quality Shaft Bar's Specification

Size Range : 6mm - 75mm (1/4" - 3")

Length - 3 to 6 Meters
Tolerances - h7, h8, h9, j6, f7, f8
Straightness - 0.5 mm per Meter
Heat Treatments - Soft Annealing, Solution Annealing, Quenched, & Tempered
Free from radioactive elements & mercury, lead contamination
Used In - Pump Shafts, Valve Shafts, Cylinder Shafts, Bearing Bars, Boat Shafts, Piston Shafts.


Square and Hexagonal Bright Bar's Specification

Size Range : 16mm - 45 mm ( 5/8" - 1 3/4")

Length - 3 to 6 Meters
Tolerances - h11, k12, k13
Grit Polished as per Customer’s Request
Heat Treatment - Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered
Bars End Finish - Chamfered Ends, Plain ends without Burrs or Sharp Edges
Specifications - As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
100% Identified through handheld spectrometer
Free from radioactive elements & mercury, lead contamination


Forged & Turned Round Bar's Specification

Size Range : 125 mm to 500 mm (5" - 20")

Length - 3 to 6 Meters
Solution Annealed
Heat Treatments Soft Annealed, Solution Annealed, Quenched & Tempered
Ultrasonic Tested
Free From Surface Defects and Cracks
100% Identified with Handheld Spectrometer
Free from radioactive elements & mercury, lead contamination


Flat Bar's Specification

Size Range :

Size (mm) Size (inch) Thickness (mm) Thickness (in Inches)
25mm 1" 5 mm to 20 mm 1/5" - 4/5"
30 mm 1-3/16" 5 mm to 20 mm 1/5" - 4/5"
32mm 1-1/4" 6 mm to 20 mm 1/4" - 4/5"
35mm 1-3/8" 5 mm to 20 mm 1/5" - 4/5"
40mm 1-4/7" 5 mm to 25 mm 1/5" - 1"
45mm 1-7/9" 5 mm to 25 mm 1/5" - 1"
50mm 2" 5 mm to 32 mm 1/5" - 1-1/4"
55mm 2-3/16" 12 mm to 25 mm 1/2" - 1"
60mm 2-3/8" 5 mm to 35 mm 1/5" - 1-3/8"
63mm 2-1/2" 10 mm to 30 mm 3/8" - 1-3/16"
65mm 2-5/9" 10 mm to 30 mm 3/8" - 1-3/16"
70mm 2-3/4" 6 mm to 25 mm 1/4" - 1"
75mm 3" 8 mm to 25 mm 5/16" - 4/5"
80mm 3-1/8" 8 mm to 20 mm 5/16" - 4/5"
90mm 3-1/2" 8 mm to 20 mm 5/16" - 4/5"
100mm 4" 8mm, 10mm, 12mm 5/16", 2/5", 1/2"
150mm 6" 8 mm to 20mm 5/16" - 4/5"

5 to 6 meters bars
Hot Rolled, Annealed & Pickled
Both ends are color coded as per customer’s specific requirements.
Specifications as per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc
Laser printing as per grade & size
Free from radioactive elements & mercury, lead contamination


Hot Rolled Hexagonal & Sharp Cornered Square Bar's Specification

Size Range :
SQUARES - 18mm - 47mm (11/16" to 1-6/7")
HEXAGONALS - 18mm - 57mm (11/16" to 2-1/4")

Length - upto 8 Meters
100% Identified with Handheld Spectrometer
Hot rolled(black) surface.
Heat treatment - Annealed, Solution Annealed, Oil & Water Quenched, Tempering & Normalizing Cold suwable


Hot Rolled Round Corner Squares Bar's Specification

Size Range : 45 mm X 45 mm, 55 mm X 55 mm, 63 mm X 63 mm, 75 mm X 75 mm, 80 mm X 80 mm, 85 mm X 85 mm, 95 mm X 95 mm, 100 mm X 100 mm

Length Upto 8 Meters
Hot Rolled ( Black ) Surface
100% Ultrasonically tested
Spot grinded or fully grinded surface
Free of surface defects/cracks
Cold Sawable
Smooth Ends without sharp edges
100% Material Identity tested through handheld Spectrometer
Free from radioactive elements & mercury, lead contamination


Hot Rolled Round Bar's Specification

Size Range : 16 to 125 mm (5/8" - 5")

Length - Upto 8 Meters
Hot Rolled ( Black ) Surface
100% Ultrasonically Tested
Spot grinded
Heat Treated - Soft Annealing, Solution Annealing, Oil & Water Quenching, Tempered & Normalized
Free of surface defects/cracks
Cold Sawable
100% material identity tested through handheld spectrometer
Free from radioactive elements & mercury, lead contamination